Strictly I.C. Magazine Database
Version 1.0  02/09/10
Copyright 2010

This documented is intended for private use and is structured so that each line represents one article.  A simple
text editor with a FIND search ability can be used to do KEYWORD search for a particular article.  It is organized
in fields (separated by a ;) where the first field is "Strictly I.C.", the second is the date, the third is the title,
the fourth is the author and the last is a personal annotation/comment


Strictly I.C.; Feb/Mar 1989; Design and Fabrication of Piston Rings Part 1; George S. Trimble;; Technique ***
Strictly I.C.; Feb/Mar 1989; In the Shop-Threaded Connections; Bob Paule;; Tutorial ***
Strictly I.C.; Feb/Mar 1989; Winged Motors-Original Ohlsson: General Layout Part 2; Roger Schroeder;; Airplane motor discussion
Strictly I.C.; Feb/Mar 1989; Pilgrim's Progress-Steel Marking Stamp Holder, Valve Seat Design, Valve Seat Lapping Tool and Corner-rounding Cutter; Bruce Satra;; Tips
Strictly I.C.; Feb/Mar 1989; Lapped Pistons and a Running Fit; George M Aldrich;; Discussion
Strictly I.C.; Feb/Mar 1989; How to Design Your Own Two-cycle Engine Part 5; Richard Condon;; Discussion

Strictly I.C.; Apr/May 1989; Design and Fabrication of Piston Rings Part 2; George S. Trimble;; Technique ***
Strictly I.C.; Apr/May 1989; In the Shop-Measuring Compression Ratio; Bob Paule;; In depth discussion
Strictly I.C.; Apr/May 1989; Roger's Corner-Nickel Plating; Roger Paul;; Technique ***
Strictly I.C.; Apr/May 1989; Antique Farm Gasoline Engine Part 1; Hamilton B. Upshir;; 3/4" bore, 1" stroke, water-cooled model construction article
Strictly I.C.; Apr/May 1989; Hole in the Right Place; D.H. Chaddock;; Technique ***
Strictly I.C.; Apr/May 1989; Pilgrim's Progress-Mill-side Chat Part 1; Bruce B. Satra;; Story about building a simple single cylinder engine
Strictly I.C.; Apr/May 1989; How to Design Your Own Two-cycle Engine Part 6; Richard Condon;; Discussion
Strictly I.C.; Apr/May 1989; Winged Motors-Original Ohlsson: General Layout Part 3; Roger Schroeder;; Airplane motor discussion

Strictly I.C.; Jun/Jul 1989; Testing I.C. Engines Part 1; Albert Hutton;; Discussion
Strictly I.C.; Jun/Jul 1989; Pilgrim's Progress-Mill-side Chat Part 2; Bruce B. Satra;; More story
Strictly I.C.; Jun/Jul 1989; Winged Motors-Original Ohlsson: General Layout Part 4; Roger Schroeder;; Airplane motor discussion
Strictly I.C.; Jun/Jul 1989; Antique Farm Gasoline Engine Part 2; Hamilton B. Upshir;; 3/4" bore, 1" stroke, water-cooled model construction article
Strictly I.C.; Jun/Jul 1989; Roger's Corner-Radial Engine Cam Ring Design; Roger Paul;; Discussion
Strictly I.C.; Jun/Jul 1989; Simple & Easy Heat-Treatment of Shop-made Cutters; Guy Lautard;; Technique ***
Strictly I.C.; Jun/Jul 1989; In the Shop-Cold Blackening Steel at Room Temperature; Bob Paule;; Discussion ***
Strictly I.C.; Jun/Jul 1989; Design and Fabrication of Piston Rings Part 3; George S. Trimble;; Technique ***

Strictly I.C.; Aug/Sept 1989; -----Missing-----

Strictly I.C.; Oct/Nov 1989; -----Missing-----

Strictly I.C.; Dec/Jan 1989; -----Missing-----

Strictly I.C.; Feb/Mar 1990; -----Missing-----

Strictly I.C.; Apr/May 1990; -----Missing-----

Strictly I.C.; Jun/Jul 1990; -----Missing-----

Strictly I.C.; Aug/Sept 1990; -----Missing-----

Strictly I.C.; Oct/Nov 1990; -----Missing-----

Strictly I.C.; Dec/Jan 1990; -----Missing-----

Strictly I.C.; Feb/Mar 1991; -----Missing-----

Strictly I.C.; Apr/May 1991; -----Missing-----

Strictly I.C.; Jun/Jul 1991; Look at Spark Ignition Systems for Model Engines; Floyd E. Carter;; Discussion
Strictly I.C.; Jun/Jul 1991; Pilgrim's Progress-Producing Miniature Hex Nuts For Your Miniature Screws; Bruce B. Satra;; Technique ***
Strictly I.C.; Jun/Jul 1991; Design Ideas-Flywheel Inertia; Richard W. Condon;; Discussion
Strictly I.C.; Jun/Jul 1991; In the Shop-Anaerobic or Chemical Locking Technology Part 1; Bob Paule;; Discussion ***
Strictly I.C.; Jun/Jul 1991; Robin, 1.25cc, Four-stroke Cycle, Glow Ignition Engine Part 3; P.E.L. Whittle;; Model construction article
Strictly I.C.; Jun/Jul 1991; Report on the 2nd Annual, NAME exhibition; Robert A. Washburn
Strictly I.C.; Jun/Jul 1991; Winged Motors-Midget Gas Engine Part 1; Roger Schroeder;; Airplane motor construction article

Strictly I.C.; Aug/Sept 1991; Way to Chrome Plating in Ten Easy Steps Part 1; E.D. Cox;; Tutorial
Strictly I.C.; Aug/Sept 1991; Pilgrim's Progress-More on Nuts; Bruce B. Satra;; Discussion ***
Strictly I.C.; Aug/Sept 1991; Winged Motors-Midget Gas Engine Part 2; Roger Schroeder;; Airplane motor construction article
Strictly I.C.; Aug/Sept 1991; Fuller & Johnson's 1909 Farm-type Water Pump Engine Part 2; Everett Rice;; Model construction article
Strictly I.C.; Aug/Sept 1991; CAM Axial 60 2S Engine Part 1; Brayton B. Paul;; Model construction article
Strictly I.C.; Aug/Sept 1991; In the Shop-Anaerobic or Chemical Locking Technology Part 2: Conclusion; Bob Paule;; Discussion ***
Strictly I.C.; Aug/Sept 1991; Design Ideas-Gear Train Calculations; Richard W. Condon;; Discussion

Strictly I.C.; Oct/Nov 1991; Way to Chrome Plating in Ten Easy Steps Part 2; E.D. Cox;; Tutorial
Strictly I.C.; Oct/Nov 1991; Design Ideas-Crankshaft Counterweights; Richard W. Condon;; Discussion
Strictly I.C.; Oct/Nov 1991; In the Shop-Anaerobic or Chemical Locking Technology Part 3: Conclusion; Bob Paule;; Discussion ***
Strictly I.C.; Oct/Nov 1991; Fuller & Johnson's 1909 Farm-type Water Pump Engine Part 3; Everett Rice;; Model construction article
Strictly I.C.; Oct/Nov 1991; CAM Axial 60 2S Engine Part 2; Brayton B. Paul;; Model construction article
Strictly I.C.; Oct/Nov 1991; Pilgrim's Progress-Valve Seats; Bruce B. Satra;; Discussion
Strictly I.C.; Oct/Nov 1991; Winged Motors-Midget Gas Engine Part 3: Crankcase; Roger J. Schroeder;; Model construction article

Strictly I.C.; Dec/Jan 1991; Way to Chrome Plating in Ten Easy Steps Part 3; E.D. Cox;; Tutorial
Strictly I.C.; Dec/Jan 1991; In the Shop-Anaerobic or Chemical Locking Technology Part 4: Conclusion; Bob Paule;; Discussion ***
Strictly I.C.; Dec/Jan 1991; Miniature Wright J5 Engine, a 1/4 Scale, 9-Cylinder Radial Part 1; Carl Eric Carlsson;; Model construction article
Strictly I.C.; Dec/Jan 1991; Fuller & Johnson's 1909 Farm-type Water Pump Engine Part 4; Everett Rice;; Model construction article
Strictly I.C.; Dec/Jan 1991; Winged Motors-Midget Gas Engine Part 4: Crankcase; Roger J. Schroeder;; Model construction article

Strictly I.C.; Feb/Mar 1992; -----Missing-----

Strictly I.C.; Apr/May 1992; -----Missing-----

Strictly I.C.; Jun/Jul 1992; Hexe und Dixie: Some Considerations on the Design of Radial, 2-stroke Engines; Leonard Woods;; Discussion
Strictly I.C.; Jun/Jul 1992; Winged Motors-Simple Indexing Head for Gear Cutting: Crankcase; Roger J. Schroeder;; Tool description
Strictly I.C.; Jun/Jul 1992; Pilgrim's Progress-Whys and Wherefores of Building a Single-cylinder Engine as a Test Bed; Bruce B. Santra;; Discussion
Strictly I.C.; Jun/Jul 1992; Construct the Mate 2CC Model Diesel Engine: Beginner Gives His View of Technique Part 2; Joe Kenyon;; Description
Strictly I.C.; Jun/Jul 1992; Miniature Wright J5 Engine, a 1/4 Scale, 9-Cylinder Radial Part 4; Carl Eric Carlsson;; Model construction article
Strictly I.C.; Jun/Jul 1992; In the Shop-Spring Winding; Bob Paule;; Discussion ***
Strictly I.C.; Jun/Jul 1992; Design Ideas: Tuning for Power; Richard Condon;; Basic language program listing
Strictly I.C.; Jun/Jul 1992; Fine Tuning the Spark Ignition System; Floyd E. Carter;; Discussion

Strictly I.C.; Aug/Sept 1992; -----Missing-----

Strictly I.C.; Oct/Nov 1992; -----Missing-----

Strictly I.C.; Dec/Jan 1992; -----Missing-----

Strictly I.C.; Feb/Mar 1993; -----Missing-----

Strictly I.C.; Apr/May 1993; -----Missing-----

Strictly I.C.; Jun/Jul 1993; -----Missing-----

Strictly I.C.; Aug/Sept 1993; -----Missing-----

Strictly I.C.; Oct/Nov 1993; -----Missing-----

Strictly I.C.; Dec/Jan 1994; Shop-made, Shop-size Electric Discharge Machine Part 3; Robert A. Washburn;; Construction article for an EDM large enough to make a 1/4 scale Strombert Model 97 carburetor
Strictly I.C.; Dec/Jan 1994; Design Ideas-Centrifugal Clutch for Miniature Engines; Richard Condon;; Discussion
Strictly I.C.; Dec/Jan 1994; Building the Merritt Zimmerman Designed Kinner K-5 Radial Aero Engine Part 1; Pieter P. Dekker;; Construction article
Strictly I.C.; Dec/Jan 1994; Novice's Views to Machining-Setting Over Single-Journal Over-Hung Crankshafts; Alan R. Charlwood;; Tutorial
Strictly I.C.; Dec/Jan 1994; In the shop-1993 Midlands Model Engineering Exhibition; Bob Paule;; Trip report
Strictly I.C.; Dec/Jan 1994; Turbojet Review; Ken Knaell
Strictly I.C.; Dec/Jan 1994; Spark Ignition Conversions Using Hall-effect Components; F.E. Carter;; Discussion

Strictly I.C.; Feb/Mar 1994; -----Missing-----

Strictly I.C.; Apr/May 1994; -----Missing-----

Strictly I.C.; Jun/Jul 1994; -----Missing-----

Strictly I.C.; Aug/Sept 1994; -----Missing-----

Strictly I.C.; Oct/Nov 1994; -----Missing-----

Strictly I.C.; Dec/Jan 1995; -----Missing-----

Strictly I.C.; Feb/Mar 1995; -----Missing-----

Strictly I.C.; Apr/May 1995; -----Missing-----

Strictly I.C.; Jun/Jul 1995; -----Missing-----

Strictly I.C.; Aug/Sept 1995; -----Missing-----

Strictly I.C.; Oct/Nov 1995; -----Missing-----

Strictly I.C.; Dec/Jan 1996; -----Missing-----

Strictly I.C.; Feb/Mar 1996; 1/6th-scale De Havilland Cirrus Mk. 1, 4-cylinder, In-line, Glow-ignition, Zero Engine Part 1; P.E.L Whittle;; Model construction article
Strictly I.C.; Feb/Mar 1996; Home Machine-shop Electronics: Smattering of Basic Concepts and Components Part 1; Gordon L. & Rex G. Stanley;; Basic tutorial
Strictly I.C.; Feb/Mar 1996; In the Shop-Tape Storage Holders; Bob Paule;; Accessory description
Strictly I.C.; Feb/Mar 1996; Cutting Threads on a Lathe; Raymond T. Heckert;; Brief description
Strictly I.C.; Feb/Mar 1996; Bits & Pieces-Fabricated Cylinder Block; Hamilton Upshire;; Technique
Strictly I.C.; Feb/Mar 1996; Sidewinder, Another Coil Winding Machine; Bob Shores;; Tool construction article
Strictly I.C.; Feb/Mar 1996; Pilgrim's Progress-Bit of Engine Wisdom; Bruce B. Satra;; Engine design discussion
Strictly I.C.; Feb/Mar 1996; Winged Motors-Simple Single Part 1; Roger J. Schroeder;; Model construction article
Strictly I.C.; Feb/Mar 1996; Machining True Involute Forms With the Aid of a Personal Computer; Todd Spath;; Discussion

Strictly I.C.; Apr/May 1996; Model Turbojet Thermo-dynamic Design Point Cycle Program: Computer Spreadsheet Used in Jet Engine Design Work; Mike Early
Strictly I.C.; Apr/May 1996; Finish Your Engine; Randy Higgins;; Body filling and other efforts
Strictly I.C.; Apr/May 1996; Home Machine-shop Electronics: Smattering of Basic Concepts and Components Part 2; Gordon L. & Rex G. Stanley;; Basic tutorial
Strictly I.C.; Apr/May 1996; Winged Motors-Simple Single Part 2; Roger J. Schroeder;; Model construction article
Strictly I.C.; Apr/May 1996; Electric Discharge Machine Part 1: Mechanical Aspects; Robert A Washburn;; Construction article
Strictly I.C.; Apr/May 1996; 1/6th-scale De Havilland Cirrus Mk. 1, 4-cylinder, In-line, Glow-ignition, Zero Engine Part 2; P.E.L Whittle;; Model construction article
Strictly I.C.; Apr/May 1996; Design Ideas-Recoil Starters for Model Engines; Richard W. Condon;; Description
Strictly I.C.; Apr/May 1996; In the Shop-Small Parts Vise; Bob Paule;; Construction article
Strictly I.C.; Apr/May 1996; Pilgrim's Progress-Potpourri;; Bruce B. Satra;; Supercharges and piston rings

Strictly I.C.; Jun/Jul 1996; Notes on the Construction of a 75CC Flat Four-the BP75; Brian Perkins;; Description
Strictly I.C.; Jun/Jul 1996; Using Spline Interpolation to Machine Free-form Contours Part 3; Todd M. Spath;; Using this method to describe and airfoil
Strictly I.C.; Jun/Jul 1996; Maxse-t Seven, a Fully-equipped, 7-cylinder Radial; Robert A. Washburn;; Description
Strictly I.C.; Jun/Jul 1996; 1/6th-scale De Havilland Cirrus Mk. 1, 4-cylinder, In-line, Glow-ignition, Zero Engine Part 3; P.E.L Whittle;; Model construction article
Strictly I.C.; Jun/Jul 1996; Winged Motors-Simple Single Part 3; Roger J. Schroeder;; Model construction article
Strictly I.C.; Jun/Jul 1996; Electric Discharge Machine Part 2: PC Board Aspects; Robert A Washburn;; Construction article
Strictly I.C.; Jun/Jul 1996; In the Shop-Seventh Annual NAMES Exhibition; Bob Paule;; Trip report

Strictly I.C.; Aug/Sept 1996; Cutting Curved Surfaces on the Lathe Part 1: Circular Arcs; Mike Early;; Technique
Strictly I.C.; Aug/Sept 1996; Winged Motors-Simple Single Part 4; Roger J. Schroeder;; Model construction article
Strictly I.C.; Aug/Sept 1996; Saga of the Viper Twin; W. Bond;; Story
Strictly I.C.; Aug/Sept 1996; In the Shop-English to American; Bob Paule;; English screws to American screw equivalents
Strictly I.C.; Aug/Sept 1996; Pilgrim's Progress-Surface Grinder, a Useful Adjunct in the Home Shop; Bruce B. Satra;; Tutorial
Strictly I.C.; Aug/Sept 1996; 1/6th-scale De Havilland Cirrus Mk. 1, 4-cylinder, In-line, Glow-ignition, Zero Engine Part 4; P.E.L Whittle;; Model construction article
Strictly I.C.; Aug/Sept 1996; Balancing a Radial Engine; Allan G. Fillery;; Technique
Strictly I.C.; Aug/Sept 1996; Design Ideas-Flywheel Inertia; Richard W. Condon;; Discussion
Strictly I.C.; Aug/Sept 1996; Useful Direct Quotes
Strictly I.C.; Aug/Sept 1996; Atkinson Cycle, Farm-type Engine; J.M. Tochtrop;; Description

Strictly I.C.; Oct/Nov 1996; From the Typewriter of Barrington Hares, Design Consultant and Experimental Engineer
Strictly I.C.; Oct/Nov 1996; Fixture for Grinding the Helix of End Mill Flutes; Ross Mathis;; Description
Strictly I.C.; Oct/Nov 1996; 1/6th Scale Kinner, 5-cylinder Radial Part 1; David Johnson;; Construction article
Strictly I.C.; Oct/Nov 1996; In the Shop-Small Passage Plugs; Bob Paule;; Description
Strictly I.C.; Oct/Nov 1996; Design Ideas-Compression Release Mechanisms; Richard W. Condon;; Construction article
Strictly I.C.; Oct/Nov 1996; Winged Motors-Simple Single Part 5; Roger J. Schroeder;; Model construction article
Strictly I.C.; Oct/Nov 1996; Practical Guide to Nickel-Cadmium Cells and Batteries; Floyd E. Carter;; Discussion

Strictly I.C.; Dec/Jan 1997; Turret and Box Tool for the Myford S7; Arthur A Leak;; Tool accessory construction article
Strictly I.C.; Dec/Jan 1997; 1/6th Scale Kinner, 5-cylinder Radial Part 2; David Johnson;; Construction article
Strictly I.C.; Dec/Jan 1997; Cutting Gears on a Shaper; Leonard Woods; Description and program
Strictly I.C.; Dec/Jan 1997; In the Shop-Female Centers; Bob Paule;; Tutorial
Strictly I.C.; Dec/Jan 1997; Winged Motors-Simple Single Part 6; Roger J. Schroeder;; Model construction article
Strictly I.C.; Dec/Jan 1997; Forum 01-Improvement to the 2-stroke Engine; John Quigley;; Discussion
Strictly I.C.; Dec/Jan 1997; Two-stroke Engines-Filling the Crankcase; Derek Stollery;; Description
Strictly I.C.; Dec/Jan 1997; Quick Method of Finding Radial Rod Centers; William A Mazak;; Uses CAD
Strictly I.C.; Dec/Jan 1997; Tip-sheet-Calculating Angles; Tony Phillips;; Description
Strictly I.C.; Dec/Jan 1997; Starter Clutch Assembly; Edward F. Ellison;; Description
Strictly I.C.; Dec/Jan 1997; Cylinder Bolt Former; Lewis Throop;; Description
Strictly I.C.; Dec/Jan 1997; Tapping Notes; Karl Young
Strictly I.C.; Dec/Jan 1997; High-tension Coils; Robert A. Hanna;; Story
Strictly I.C.; Dec/Jan 1997; Exact Finishing of Cylindrical Parts, Turning Oval Pistons & Work Holder for Small Screws; Rolf Depping;; Suggestions
Strictly I.C.; Dec/Jan 1997; Glass Fuel Tanks & Indexing on a Lathe Chuck; David Schofield
Strictly I.C.; Dec/Jan 1997; Positioning Individual Cam Lobes for a 4-cylinder Engine; Heinz Kornmuller;; Description

Strictly I.C.; Feb/Mar 1997; 1/6th Scale Kinner, 5-cylinder Radial Part 3; David Johnson;; Construction article
Strictly I.C.; Feb/Mar 1997; Miniature Engine Electronic Ignition System; Dan Reichmuth;; Construction article
Strictly I.C.; Feb/Mar 1997; Dry Transfer Etching of Dials and Nameplates; E.D. Cox;; Technique ***
Strictly I.C.; Feb/Mar 1997; Bits and Pieces-Simple Compensating Carburetor; Hamilton Upshur;; Description
Strictly I.C.; Feb/Mar 1997; In the Shop-Sight Gauge Oiler; Bob Paule;; Description
Strictly I.C.; Feb/Mar 1997; Construction of 1/4-32 Miniature Spark Plugs; Lewis Throop;; Construction article
Strictly I.C.; Feb/Mar 1997; Winged Motors-Lofquist Diesel Conversion Head for the Simple Single; Roger J. Schroeder;; Construction article
Strictly I.C.; Feb/Mar 1997; Crankcase Pressure?; Bob Shores;; Regulator construction article
Strictly I.C.; Feb/Mar 1997; Spark Pulse Polarity and the I.C. Engine; Floyd Carter;; Description
Strictly I.C.; Feb/Mar 1997; Which Side is Up?; J.E. Kemble;; An exercise in fixturing using the Magnum .91 four-stroke

Strictly I.C.; Apr/May 1997; 1/6th Scale Kinner, 5-cylinder Radial Part 4; David Johnson;; Construction article
Strictly I.C.; Apr/May 1997; Challenger V8; Paul Knapp;; Builder of the engine on the cover gives some insight into his project
Strictly I.C.; Apr/May 1997; Sleeve-valve Aircraft Engine; John R. Feeney;; Description
Strictly I.C.; Apr/May 1997; Model A Ford Historical Notes and Specifications; Rollin Armer;; Description
Strictly I.C.; Apr/May 1997; Book Review: Bentley BR2, WW1 Rotary Aero Engine by L.K. Blackmore; Robert A. Washburn
Strictly I.C.; Apr/May 1997; In the Shop-Gear Backlash & Center Dist.; Bob Paule;; Center Distances of gear mountings, gear backlash
Strictly I.C.; Apr/May 1997; Combustion in Spark-ignition Engines; Pieter Dekker;; Discussion
Strictly I.C.; Apr/May 1997; Big End Design for Radial Engines; Leonard Woods;; Description
Strictly I.C.; Apr/May 1997; Winged Motors-Simple Twin Part 1; Roger J. Schroeder;; Model construction article
Strictly I.C.; Apr/May 1997; Pilgrim's Progress-More Wisdom on Tapping and the Process of Lost Wax Casting; Bruce B. Satra;; Description
Strictly I.C.; Apr/May 1997; Whys and How of Miniature Engine Balancing; Randall Cox;; Technique
Strictly I.C.; Apr/May 1997; Book Review: Ignition Coils & Magnetos in Miniature, How They Work & How to Build Them by Bob Shore; Arthur DeKalb

Strictly I.C.; Jun/Jul 1997; Peewit..... 5.5CC Horizontally Opposed, 4-Cylinder, 4-stroke, Air Cooled, Glow Ignition Aero Engine Part 1; P.E.L. Whittle;; Construction article
Strictly I.C.; Jun/Jul 1997; Building a Simple, Variable Compression Head for the Drone Diesel MkII; Bert Striegler;; Construction article
Strictly I.C.; Jun/Jul 1997; Armchair Machinist on Optimizing Big Ends of Radial Engines; Leonard Woods;; Technique
Strictly I.C.; Jun/Jul 1997; Centering 3-jaw Chucks; Edward W. Degear;; Tool modification article
Strictly I.C.; Jun/Jul 1997; In the Shop-Report on the 1997 NAMES Exhibition; RAW;; Trip report
Strictly I.C.; Jun/Jul 1997; Pilgrim's Progress-Workshop Hints; Bruce Satra;; Vibration damping, parting off, drilling small holes
Strictly I.C.; Jun/Jul 1997; Winged Motors-Simple Twin Part 2; Roger J. Schroeder;; Model construction article
Strictly I.C.; Jun/Jul 1997; Profanity Preventer; Bob Shore;; Engine starter construction article
Strictly I.C.; Jun/Jul 1997; Mounting a Vernier or Dial Caliper to Plot Carriage Movement on Your Lathe; Hank Ihlein;; Construction article

Strictly I.C.; Aug/Sept 1997; Winged Motors-Simple Twin Part 3; Roger J. Schroeder;; Model construction article
Strictly I.C.; Aug/Sept 1997; Metric Ball Bearings; T.H. Miller;; Discussion
Strictly I.C.; Aug/Sept 1997; In the Shop-Small Gear Pumps; Bob Paule;; Description
Strictly I.C.; Aug/Sept 1997; Spark Ignition Without a High Voltage Distributor; Floyd E. Carter;; Description
Strictly I.C.; Aug/Sept 1997; Armchair Machinist-Ferrous Materials; Leonard Woods;; Brief discussion
Strictly I.C.; Aug/Sept 1997; Explanation of Solid State Ignition; Bob Shores;; Discussion
Strictly I.C.; Aug/Sept 1997; Peewit..... 5.5CC Horizontally Opposed, 4-Cylinder, 4-stroke, Air Cooled, Glow Ignition Aero Engine Part 2; P.E.L. Whittle;; Construction article
Strictly I.C.; Aug/Sept 1997; Tip Sheet; Scott Beshears;; Basic info on cutting speed, tap drill size, CAD packages, 
Strictly I.C.; Aug/Sept 1997; Tip Sheet-Diesel Unit Fuel Injector; Dennis Scott Bendure;; Brief construction article
Strictly I.C.; Aug/Sept 1997; Tip Sheet-Spark Plug Connector for High-Voltage; Norm Brockelsby of Norm's Miniature;; Description
Strictly I.C.; Aug/Sept 1997; Tip Sheet-Reaming the Close-fit Way; William Kirk;; Using a D-bit ground drill rod
Strictly I.C.; Aug/Sept 1997; Tip Sheet-5C Collet Adapter; E.D. Cox;; Tool drawing
Strictly I.C.; Aug/Sept 1997; Tip Sheet-Storage Cabinets; Richard McMahon;; Personal experience
Strictly I.C.; Aug/Sept 1997; Tip Sheet-Small Dividing Device; Arthur Leak;; Brief construction article
Strictly I.C.; Aug/Sept 1997; Tip Sheet-True-up; Oscar Ortiz;; Technique
Strictly I.C.; Aug/Sept 1997; Tip Sheet-Fuel Dynamics; Maurice Tyler;; Tool construction article
Strictly I.C.; Aug/Sept 1997; Tip Sheet-Breaker Point;; Jim Moyer;; Description

Strictly I.C.; Oct/Nov 1997; Armchair Machinist-Bevel Gears; Leonard Woods;; Tutorial
Strictly I.C.; Oct/Nov 1997; Turning a Crank Pin-Applies to Single-cylinder Crankshafts; Dan Goodwin;; Description
Strictly I.C.; Oct/Nov 1997; Peewit..... 5.5CC Horizontally Opposed, 4-Cylinder, 4-stroke, Air Cooled, Glow Ignition Aero Engine Part 3; P.E.L. Whittle;; Construction article
Strictly I.C.; Oct/Nov 1997; Working Towards Excellence-Philosophical Approach to Miniature Engine Building; Harold O. Beckett;; Discussion
Strictly I.C.; Oct/Nov 1997; In the Shop-Lathe Chuck Maintenance; Bob Paule;; Discussion
Strictly I.C.; Oct/Nov 1997; Winged Motors-Simple Twin Part 4; Roger J. Schroeder;; Model construction article
Strictly I.C.; Oct/Nov 1997; Reasons For the Use of More Than One Cylinder & Engine Balance; Pieter Dekker;; Discussion

Strictly I.C.; Dec/Jan 1998; Rating Construction Projects-Richey Rating System; Preston Richey;; Proposed ranking system for construction projects
Strictly I.C.; Dec/Jan 1998; Light-duty Spot Welder; Todd Spath;; Construction article
Strictly I.C.; Dec/Jan 1998; Balancing a Radial Engine; J.D. Schmidt;; Technique
Strictly I.C.; Dec/Jan 1998; In the Shop-It's Been Fun; Bob Paule;; Farewell
Strictly I.C.; Dec/Jan 1998; Pilgrim's Progress-Roller Tappets for the Morton M5; Bruce B. Satra;; Construction article
Strictly I.C.; Dec/Jan 1998; Winged Motors-Simple Twin Part 5; Roger J. Schroeder;; Model construction article
Strictly I.C.; Dec/Jan 1998; Building the Bottle Engine, Single-cylinder, 2-stroke cycle, 1" Bore & 1 1//8" Stroke, Spark Ignition Part 1; Bill Reichart;; Construction article
Strictly I.C.; Dec/Jan 1998; First Annual P.R.I.M.E. Exhibition; Robert A. Washburn
Strictly I.C.; Dec/Jan 1998; Peewit..... 5.5CC Horizontally Opposed, 4-Cylinder, 4-stroke, Air Cooled, Glow Ignition Aero Engine Part 4; P.E.L. Whittle;; Construction article
Strictly I.C.; Dec/Jan 1998; Elmer A. Wall, The Father of Us All?; Robert Kradjian;; History

Strictly I.C.; Feb/Mar 1998; Peewit..... 5.5CC Horizontally Opposed, 4-Cylinder, 4-stroke, Air Cooled, Glow Ignition Aero Engine Part 5; P.E.L. Whittle;; Construction article
Strictly I.C.; Feb/Mar 1998; Shop Tips-Shop Safety Part 1; Oscar Ortiz;; Story
Strictly I.C.; Feb/Mar 1998; Book Review: Air Board-Technical Notes, issued by Controller Technical Department, 1917; Robert A. Washburn
Strictly I.C.; Feb/Mar 1998; Building the Bottle Engine, Single-cylinder, 2-stroke cycle, 1" Bore & 1 1//8" Stroke, Spark Ignition Part 2; Bill Reichart;; Construction article
Strictly I.C.; Feb/Mar 1998; Armchair Machinist-Salmson Radial Engines; Leonard Woods;; Description
Strictly I.C.; Feb/Mar 1998; Progress Report on Building a 1/4-scale Aquila, 9-cylinder, sleeve-valve Engine; Brian Perkins;; Description
Strictly I.C.; Feb/Mar 1998; Bits and Pieces-Engine Lubrication Part 1; Hamilton Upshur;; Discussion

Strictly I.C.; Apr/May 1998; Kirk Miniature Dynamometer Part 1; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article
Strictly I.C.; Apr/May 1998; Building the Bottle Engine, Single-cylinder, 2-stroke cycle, 1" Bore & 1 1//8" Stroke, Spark Ignition Part 3; Bill Reichart;; Construction article
Strictly I.C.; Apr/May 1998; Calculation and Machining a "Hirth Joint"; Rolf Depping;; Technique
Strictly I.C.; Apr/May 1998; Bits and Pieces-Engine Lubrication Part 2; Hamilton Upshur;; Discussion
Strictly I.C.; Apr/May 1998; Shop Tips-Shop Safety Part 2; Oscar Ortiz;; Basic information
Strictly I.C.; Apr/May 1998; Armchair Machinist-More on Big Ends for Radial Engines; Leonard Woods;; Description
Strictly I.C.; Apr/May 1998; Twin-cam Twin; Edward F. Ellison;; Description

Strictly I.C.; Jun/Jul 1998; Kirk Miniature Dynamometer Part 2; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article
Strictly I.C.; Jun/Jul 1998; Upshur Vertical Single, A Working Model Utility Gasoline Engine Part 1; Hamilton Upshur;; Construction article
Strictly I.C.; Jun/Jul 1998; Crankshaft Grinder Part 1; Barry Dumaw;; Construction article
Strictly I.C.; Jun/Jul 1998; Armchair Machinist-Odds and Ends Part 1; Leonard Woods;; Graduated Saddle Hand Wheel

Strictly I.C.; Aug/Sept 1998; Building a Modern 2-stroke Engine; Tim Hickox;; Discussion
Strictly I.C.; Aug/Sept 1998; Update of the Turbojet Thermodynamic Design Point Cycle Program; Michael L. Early;; Updated program
Strictly I.C.; Aug/Sept 1998; Armchair Machinist-Odds and Ends Part 2; Leonard Woods;; Dividing Head for the Lathe Spindle, Length Stop for the Lathe Saddle, Lathe Cross Slide Stop
Strictly I.C.; Aug/Sept 1998; Crankshaft Grinder Part 2; Barry Dumaw;; Construction article
Strictly I.C.; Aug/Sept 1998; Upshur Vertical Single, A Working Model Utility Gasoline Engine Part 2; Hamilton Upshur;; Construction article
Strictly I.C.; Aug/Sept 1998; Kirk Miniature Dynamometer Part 3; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article
Strictly I.C.; Aug/Sept 1998; Custom Jeweler and Watchmaker Tries His Hand at a Whittle Robin; Robert Eaton;; Author's experience
Strictly I.C.; Aug/Sept 1998; Press Release from the North American Model Engineering Society (N.A.M.E.S) 9th Annual Exhibition

Strictly I.C.; Oct/Nov 1998; Electroforming; Lewis Throop;; Interesting way to create complex forms ***
Strictly I.C.; Oct/Nov 1998; Upshur Vertical Single, A Working Model Utility Gasoline Engine Part 4; Hamilton Upshur;; Construction article
Strictly I.C.; Oct/Nov 1998; Crankshaft Grinder Part 3; Barry Dumaw;; Construction article
Strictly I.C.; Oct/Nov 1998; Shop Tips and Shortcuts; Oscar Ortiz;; Tool chatter
Strictly I.C.; Oct/Nov 1998; Armchair Machinist-Odds and Ends Part 3; Leonard Woods;; Boring Tool Holder
Strictly I.C.; Oct/Nov 1998; Brief Description of the Design and Construction of the Norton "Manx" Engine; Rolf Depping
Strictly I.C.; Oct/Nov 1998; Press Release-Sherline Products
Strictly I.C.; Oct/Nov 1998; Split Min Bearing For the 1/6th Scale Zimmerman Cirrus; Bob Allen;; Construction article
Strictly I.C.; Oct/Nov 1998; Kirk Miniature Dynamometer Part 4; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article

Strictly I.C.; Dec/Jan 1999; John V. Thompson's Scorpion V8, 4.8 CID, Water Cooled, Glow Plug Ignition, Dual OHC V8 Part 1; John V. Thompson;; Construction article
Strictly I.C.; Dec/Jan 1999; Upshur Vertical Single, A Working Model Utility Gasoline Engine Part 5; Hamilton Upshur;; Construction article
Strictly I.C.; Dec/Jan 1999; Shop Tips and Shortcuts; Oscar Ortiz;; Smooth Running Gear Train, broad-nose cutting tools
Strictly I.C.; Dec/Jan 1999; Armchair Machinist-Some Thoughts on the Design of Compression Ignition Miniature Engines; Leonard Woods
Strictly I.C.; Dec/Jan 1999; Pacific Rim International Model Engineering Exhibition 2nd Annual PRIME; Robert A. Washburn;; Trip report
Strictly I.C.; Dec/Jan 1999; Product Review: Sherline Model 2000, 8-axis Milling Machine; Robert A. Washburn
Strictly I.C.; Dec/Jan 1999; Kirk Miniature Dynamometer Part 5; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article

Strictly I.C.; Feb/Mar 1999; John V. Thompson's Scorpion V8, 4.8 CID, Water Cooled, Glow Plug Ignition, Dual OHC V8 Part 2; John V. Thompson;; Construction article
Strictly I.C.; Feb/Mar 1999; In Memoriam-Merritt A. Zimmerman
Strictly I.C.; Feb/Mar 1999; Low Voltage I.C. Ignition; Floyd E. Carter;; Discussion
Strictly I.C.; Feb/Mar 1999; Shop Tips and Shortcuts; Oscar Ortiz;; Removing of broken center drills, using a 5" sine bar, knurling-a black art
Strictly I.C.; Feb/Mar 1999; Armchair Machinist-Book Review: Sparks and Flames by Crawford MacKeand; Leonard Woods
Strictly I.C.; Feb/Mar 1999; Clifford Radial Engine; T.M. Miller;; Description
Strictly I.C.; Feb/Mar 1999; Product Review: Sherline Digital Readout (DRO) for Their Milling Machine
Strictly I.C.; Feb/Mar 1999; Kirk Miniature Dynamometer Part 6; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article
Strictly I.C.; Feb/Mar 1999; Origins of the Internal Combustion Engine Part 1; Robert Kradjian;; History

Strictly I.C.; Apr/May 1999; Camshafts Are Not Beyond Your Ability; Paul Bennett;; Tutorial
Strictly I.C.; Apr/May 1999; John V. Thompson's Scorpion V8, 4.8 CID, Water Cooled, Glow Plug Ignition, Dual OHC V8 Part 3; John V. Thompson;; Construction article
Strictly I.C.; Apr/May 1999; Shop Tips and Shortcuts; Oscar Ortiz;; Tapping
Strictly I.C.; Apr/May 1999; Origins of the Internal Combustion Engine Part 2; Robert Kradjian;; History
Strictly I.C.; Apr/May 1999; Armchair Machinist-Humble Bee, Simple 0.29 cu.in. "Diesel" Part 1; Leonard Woods;; Construction article
Strictly I.C.; Apr/May 1999; Small Supplementary Vise; Pieter Dekker;; Tool construction article
Strictly I.C.; Apr/May 1999; Product Review: Installing and Using FLASHCUT CNC, Inc's FR-5X00-000 Sherline Mill Retrofit Kit; Robert A. Washburn
Strictly I.C.; Apr/May 1999; Tip Sheet: Using the Carter Electronic Ignition; Paul Bennett;; Review
Strictly I.C.; Apr/May 1999; Tips From an Old Time Machinist; Colin Browning;; Cooling & lubricating system, Parting off, lathe threading
Strictly I.C.; Apr/May 1999; Another Way of Gapping Rings; Rolph Depping;; Technique
Strictly I.C.; Apr/May 1999; Simplified Air Cleaner for Miniature Carburetors; Robert Kradjian;; Construction article
Strictly I.C.; Apr/May 1999; Line Boring Small Holes; Philip Coleman;; Technique
Strictly I.C.; Apr/May 1999; Spark Plugs; Edward Ellison;; New design
Strictly I.C.; Apr/May 1999; Ignition System for Hit-n-Miss; James K. Gehringer
Strictly I.C.; Apr/May 1999; Worn, Self-centering 3-jaw chucks; Manfred Gulke;; Using a custom washer to help aid a bell-mouth chuck
Strictly I.C.; Apr/May 1999; Vane-type Oil Pump; James A. Reynolds;; Description
Strictly I.C.; Apr/May 1999; Tapping Using Small sizes of Taps; David Jackson;; Technique
Strictly I.C.; Apr/May 1999; Upshur Spark Plug; Hamilton Upshur;; Description
Strictly I.C.; Apr/May 1999; Localized Case Hardening of Steels; Jim Moyer;; Technique
Strictly I.C.; Apr/May 1999; Morton M-5; Bruce B. Satra;; Description

Strictly I.C.; Jun/Jul 1999; John V. Thompson's Scorpion V8, 4.8 CID, Water Cooled, Glow Plug Ignition, Dual OHC V8 Part 4; John V. Thompson;; Construction article
Strictly I.C.; Jun/Jul 1999; Armchair Machinist-Humble Bee, Simple 0.29 cu.in. "Diesel" Part 2; Leonard Woods;; Construction article
Strictly I.C.; Jun/Jul 1999; Knurling Kneed Knot Be a Blak Art; Guy Lautard;; Technique
Strictly I.C.; Jun/Jul 1999; Gears Without Tears-Amplification of Using Pat Loop's Gear Hob Design; Karl Young;; 
Strictly I.C.; Jun/Jul 1999; CNC At Home-A Beginning.  The Basics of Simple CNC at Home; Robert A. Washburn;; Tutorial
Strictly I.C.; Jun/Jul 1999; Kirk Miniature Dynamometer Part 7; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article
Strictly I.C.; Jun/Jul 1999; Two-jet, Throttle Carburetor; Jerry Howell;; Construction article
Strictly I.C.; Jun/Jul 1999; Eleventh Annual Estevan Model Engineering Show; Kelly Tytlandsvik;; Trip report

Strictly I.C.; Aug/Sept 1999; John V. Thompson's Scorpion V8, 4.8 CID, Water Cooled, Glow Plug Ignition, Dual OHC V8 Part 5; John V. Thompson;; Construction article
Strictly I.C.; Aug/Sept 1999; Armchair Machinist-Humble Bee, Simple 0.29 cu.in. "Diesel" Part 3; Leonard Woods;; Construction article
Strictly I.C.; Aug/Sept 1999; Stroka-genius Square Hole Broach; Ron Chernich and Roger Schroeder;; Clever one-corner square broach tool article ***
Strictly I.C.; Aug/Sept 1999; Product Information: Comp-u-Cut, a CNC System for Amateurs; Leonard Woods
Strictly I.C.; Aug/Sept 1999; CNC at Home: Homebrew Hardware Aspects; Ron Ginger;; Discussion
Strictly I.C.; Aug/Sept 1999; Adjunct to "CNC at Home" Column; Robert L. Pegg;; Supplemental information
Strictly I.C.; Aug/Sept 1999; 1999 North American Model Engineering Society's Exposition
Strictly I.C.; Aug/Sept 1999; Where Engines Gather; Paul Knapp;; Model Engineering Museum formation
Strictly I.C.; Aug/Sept 1999; Kirk Miniature Dynamometer Part 8; William Kirk & Robert A. Washburn;; Hydraulic (mechanical water brake) dynamometer construction article
Strictly I.C.; Aug/Sept 1999; Progress Report on Building a 1/4 Scale Aquila, 9-cylinder, Sleeve-valve Engine; Brian Perkins;; Description

Strictly I.C.; Oct/Nov 1999; Where Engines Gather; Paul Knapp;; Musings
Strictly I.C.; Oct/Nov 1999; Double Dymo, 1 Cu. In., 2-cycle, Diesel Engine Part 1; Ted Maciag;; Construction article
Strictly I.C.; Oct/Nov 1999; John V. Thompson's Scorpion V8, 4.8 CID, Water Cooled, Glow Plug Ignition, Dual OHC V8 Part 6; John V. Thompson;; Construction article
Strictly I.C.; Oct/Nov 1999; Combustion in Spark-ignition Engines: Volumetric Efficiency Part 2; Pieter Dekker;; Discussion
Strictly I.C.; Oct/Nov 1999; Electronic Buzz Coil for Slow-running I.C. Engines; Floyd E. Carter;; Construction article
Strictly I.C.; Oct/Nov 1999; Forum 02-Notes on Miniature Engine Development; John Quigley;; Discussion
Strictly I.C.; Oct/Nov 1999; Jaffle Iron, Sandwich Maker & Heat-treating Piston Rings; Brian Winch;; Story and technique
Strictly I.C.; Oct/Nov 1999; Armchair Machinist-Draft Choice: Simple, Low-cost Computer Aided Design (CAD) Software Package; Leonard Woods;; Review
Strictly I.C.; Oct/Nov 1999; Making a... Pulse Jet; Emil Brauner;; Construction article

Strictly I.C.; Dec/Jan 2000; Jemma, 1/6th-scale type, 7-cylinder Radial Engine, a ME Exhibition Silver Medal Winner in 1997 Part 1; Eric Tomlinson
Strictly I.C.; Dec/Jan 2000; Double Dyno, 1 Cu. In., 2-cycle, Diesel Engine Part 2; Ted Maciag;; Construction article
Strictly I.C.; Dec/Jan 2000; Armchair Machinist-Draft Choice: More on the Origins of the Internal Combustion and Related Thoughts; Leonard Woods;; Discussion
Strictly I.C.; Dec/Jan 2000; CNC at Home: Introduction to Richard Bartlett & his COMPUCUT; Robert A. Washburn;; Tutorial
Strictly I.C.; Dec/Jan 2000; COMPUCUT: A DIY (Do It Yourself) CNC System Part 1-The Basics; Richard Bartlett;; Why Computer Numerical Control (CNC)?
Strictly I.C.; Dec/Jan 2000; Progress Report on Building a 1/4 Scale Aquila, 9-cylinder, Sleeve-valve Engine Part 3; Brian Perkins;; Description
Strictly I.C.; Dec/Jan 2000; 1999 PRIME Exhibition; Robert A. Washburn;; Trip report

Strictly I.C.; Feb/Mar 2000; Tip Sheet: Make Your Own Socket Head Cap Screws; Derek Stollery;; Technique
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Oval Pistons; W.J. Ungerman;; Technique
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Spring Winder; Frank Gough;; Technique
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Sparkler for a Small I.C. 4-stroke Engine Ignition System; Oran Frye;; Technique
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Squaring Up an Irregular Piece of Stock; Bob Boswell;; Technique
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Sharpening Twist Drills; Tim Miller;; Technique
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Oil Pump; Les Chenery;; Construction article
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Drill Press Tapping Tool; G. Rusbatch;; Construction article
Strictly I.C.; Feb/Mar 2000; Tip Sheet: Tapping Fixture; Richard Miller;; Construction article
Strictly I.C.; Feb/Mar 2000; Jemma, 1/6th-scale type, 7-cylinder Radial Engine, a ME Exhibition Silver Medal Winner in 1997 Part 2; Eric Tomlinson
Strictly I.C.; Feb/Mar 2000; Double Dyno, 1 Cu. In., 2-cycle, Diesel Engine Part 3; Ted Maciag;; Construction article
Strictly I.C.; Feb/Mar 2000; Armchair Machinist-Draft Choice: More on the Origins of the Internal Combustion and Related Thoughts; Leonard Woods;; Opposed-piston Engines
Strictly I.C.; Feb/Mar 2000; CNC at Home: BYO-CNC (Build Your Own-Computer Numerical); Lewis Throop;; Description
Strictly I.C.; Feb/Mar 2000; Where Engines Gather; Paul Knapp;; Musings

Strictly I.C.; Apr/May 2000; How to Organize an Engine Modeler's club or Association-Bay Area Engine Modeler's Club; Bob Kradjian;; Discussion
Strictly I.C.; Apr/May 2000; Trip Report on the Champlin Fighter Aircraft Museum, Mesa, Arizona; Robert A. Washburn
Strictly I.C.; Apr/May 2000; Foundry Work: Silica Sand/CO2 Process; Jim Schiller;; Technique
Strictly I.C.; Apr/May 2000; Armchair Machinist-Draft Choice: Some Unrelated Odds & Ends Part 3; Leonard Woods;; Aspect of Workshop safety
Strictly I.C.; Apr/May 2000; Design and Construction of the Chernikeeff PC R.350; Paul Chernikeeff;; Description
Strictly I.C.; Apr/May 2000; Jemma, 1/6th-scale type, 7-cylinder Radial Engine, a ME Exhibition Silver Medal Winner in 1997 Part 3; Eric Tomlinson
Strictly I.C.; Apr/May 2000; Inexpensive Collet Chuck; Stan Preston;; Tool construction article
Strictly I.C.; Apr/May 2000; Simple Lathe Tool Holder; Jack Rogerson;; Tool construction article
Strictly I.C.; Apr/May 2000; Errata-Ted Maciag's Doble Dyno Construction Drawing
Strictly I.C.; Apr/May 2000; Ooo-oo-ops; Carl Young;; Repair tips
Strictly I.C.; Apr/May 2000; Book Review: 2 Easy Steps to CNC Programming-a Beginner's Guide by David S. Hayden; Robert A. Washburn
Strictly I.C.; Apr/May 2000; Useful Direct Quotes
Strictly I.C.; Apr/May 2000; Kinner Camshaft Production; Chuck Harty;; Technique

Strictly I.C.; Jun/Jul 2000; Rolls-Royce Eagle 22, Progress Report; Barrington Hares
Strictly I.C.; Jun/Jul 2000; Armchair Machinist-Internally Toothed Gears; Leonard Woods;; Tutorial
Strictly I.C.; Jun/Jul 2000; Backyard Foundry, a Series: Construction of Forms to Pour Plaster of Paris Molds to Cast Patterns in Polyester Body Filler; Eugene S. Corl
Strictly I.C.; Jun/Jul 2000; Backyard Foundry, Another Report in the Series; Jim Lewis;; Patterns, sand molds, furnace & melting
Strictly I.C.; Jun/Jul 2000; CNC at Home: COMP-U-CUT (Do-it-yourself) CNC System Part 2; Richard Bartlett;; Producing a Turbojet Intake Nozzle
Strictly I.C.; Jun/Jul 2000; Jemma, 1/6th-scale type, 7-cylinder Radial Engine, a ME Exhibition Silver Medal Winner in 1997 Part 4; Eric Tomlinson
Strictly I.C.; Jun/Jul 2000; Bad-ass Diesels; Graham White;; Descriptions

Strictly I.C.; Aug/Sept 2000; Jemma, 1/6th-scale type, 7-cylinder Radial Engine, a ME Exhibition Silver Medal Winner in 1997 Part 5; Eric Tomlinson
Strictly I.C.; Aug/Sept 2000; Armchair Machinist-"Glower"-Mains Power Unit Lighting Glow Plugs; Leonard Woods;; Construction article
Strictly I.C.; Aug/Sept 2000; In Memoriam-Lee Root
Strictly I.C.; Aug/Sept 2000; CNC at Home: COMP-U-CUT (Do-it-yourself) CNC System Part 3; Richard Bartlett;; Rockers for the Kinner K-5
Strictly I.C.; Aug/Sept 2000; Bits & Pieces-How to Make a GHQ Run; Hamilton Upshur;; Discussion
Strictly I.C.; Aug/Sept 2000; Where the Miniature Engines Gather-An Update; Paul Knapp
Strictly I.C.; Aug/Sept 2000; Backyard Foundry, a Series: 1/3rd Scale Small Block V8 Chevrolet Project; Part 1; Eugene S. Corl;; Construction article
Strictly I.C.; Aug/Sept 2000; Conversion of a Cox Sprotman 15 to Spark Ignition and Sideport Induction; Andrew Coholic;; Technique
Strictly I.C.; Aug/Sept 2000; CAM CAT; Bob Shore;; CAM production construction article

Strictly I.C.; Oct/Nov 2000; Model Farm Engine Revisited-Farm-type, Single-cylinder, 4-stroke Cycle Engine Part 1; Hamilton Upshur;; Construction article
Strictly I.C.; Oct/Nov 2000; CNC at Home: ROBOPROBE!-Design and Basic Construction of a 2D, CNC Digitizer Part 1; Ed Bittner;; Tool construction article
Strictly I.C.; Oct/Nov 2000; Magnetos for the Bentley BR-2-Working Magnetos for the 1/4-scale Bentley BR2 Aero Engine Part 1; Hans Mulder;; Construction article
Strictly I.C.; Oct/Nov 2000; Backyard Foundry, a Series: 1/3rd Scale Small Block V8 Chevrolet Project; Part 2; Eugene S. Corl;; Construction article
Strictly I.C.; Oct/Nov 2000; Armchair Machinist-Opposed-piston Engines; Leonard Woods;; Discussion

Strictly I.C.; Dec/Jan 2001; Design Forum-Totally Opposed, Introduction to a Design Forum Using the Opposed Piston, 2-stroke Engine as a Start Part 1; Tom Roach;; Discussion
Strictly I.C.; Dec/Jan 2001; CNC at Home: ROBOPROBE!-Design and Basic Construction of a 2D, CNC Digitizer Part 2; Ed Bittner;; Tool construction article
Strictly I.C.; Dec/Jan 2001; Magnetos for the Bentley BR-2-Working Magnetos for the 1/4-scale Bentley BR2 Aero Engine Part 2; Hans Mulder;; Construction article
Strictly I.C.; Dec/Jan 2001; Model Farm Engine Revisited-Farm-type, Single-cylinder, 4-stroke Cycle Engine Part 2; Hamilton Upshur;; Construction article
Strictly I.C.; Dec/Jan 2001; Dux-Experimental Miniature Diesel Engine with High-pressure, Combustion-chamber Injection Part 1; Martin Alewijn;; Construction article
Strictly I.C.; Dec/Jan 2001; Armchair Machinist-Matters Arising; Leonard Woods;; Parallel Depth Bevel Gears, Opposed Piston Engines
Strictly I.C.; Dec/Jan 2001; Backyard Foundry, a Series: Building of a Second Backyard Foundry; Robert A. Washburn;; Description
Strictly I.C.; Dec/Jan 2001; 2000 PRIME Exhibition; Robert A. Washburn;; Trip report

Strictly I.C.; Feb/Mar 2001; Magnetos for the Bentley BR-2-Working Magnetos for the 1/4-scale Bentley BR2 Aero Engine Part 3; Hans Mulder;; Construction article
Strictly I.C.; Feb/Mar 2001; CNC at Home: CNC For Yourself Part 1; Leonard Woods and  Alfred Schubert; Construction article
Strictly I.C.; Feb/Mar 2001; Dux-Experimental Miniature Diesel Engine with High-pressure, Combustion-chamber Injection Part 2; Martin Alewijn;; Construction article
Strictly I.C.; Feb/Mar 2001; Model Farm Engine Revisited-Farm-type, Single-cylinder, 4-stroke Cycle Engine Part 3; Hamilton Upshur;; Construction article
Strictly I.C.; Feb/Mar 2001; Backyard Foundry, a Series: 1/3rd Scale Small Block V8 Chevrolet Project; Part 3; Eugene S. Corl;; Construction article
Strictly I.C.; Feb/Mar 2001; Design Forum-Totally Opposed, Introduction to a Design Forum Using the Opposed Piston, 2-stroke Engine as a Start Part 2; Tom Roach;; Discussion

Strictly I.C.; Apr/May 2001; Dux-Experimental Miniature Diesel Engine with High-pressure, Combustion-chamber Injection Part 3; Martin Alewijn;; Construction article
Strictly I.C.; Apr/May 2001; Model Farm Engine Revisited-Farm-type, Single-cylinder, 4-stroke Cycle Engine Part 4; Hamilton Upshur;; Construction article
Strictly I.C.; Apr/May 2001; How To Polish Aluminum For an Award-winning Finish; Bob Kradjian;; Technique
Strictly I.C.; Apr/May 2001; Inexpensive Flywheel And a Bit of Flywheel Theory; David Bowes;; Discussion
Strictly I.C.; Apr/May 2001; Constructing a Miniature Radiator; Jim Moyer;; Description
Strictly I.C.; Apr/May 2001; What Is It?; Jim Lewis;; Mystery concerning a, hitherto unknown by the author, 2-stroke, open crankcase single
Strictly I.C.; Apr/May 2001; Arc Welding Tips; Bob Ford
Strictly I.C.; Apr/May 2001; CNC at Home: CNC For Yourself Part 2; Leonard Woods and  Alfred Schubert; Construction article
Strictly I.C.; Apr/May 2001; Magnetos for the Bentley BR-2-Working Magnetos for the 1/4-scale Bentley BR2 Aero Engine Part 4; Hans Mulder;; Construction article
Strictly I.C.; Apr/May 2001; Design Forum-Totally Opposed, Introduction to a Design Forum Using the Opposed Piston, 2-stroke Engine as a Start Part 3; Tom Roach;; Discussion
Strictly I.C.; Apr/May 2001; Simple Cylinder Hone; John Pittner;; Tool description
Strictly I.C.; Apr/May 2001; Trip Report to: "Where Miniature Engines Gather"; Robert A. Washburn;; MAXNC report

Strictly I.C.; Jun/Jul 2001; Anzani W-type, 1/4-scale, 3-cylinder Aircraft Engine Part 1; Alfred Eichinger of Austria; Construction article
Strictly I.C.; Jun/Jul 2001; Joe Martin Foundation Awards $1,000 to "Outstanding Metalworking Craftsman" for 2001
Strictly I.C.; Jun/Jul 2001; Rolls-Royce Eagle 22, a 24-cylinder, Sleeve-valve, H-configured Crankshafts, Aero Engine Segment 1; Barrington Hares;; Description
Strictly I.C.; Jun/Jul 2001; CNC at Home: CNC For Yourself Part 3; Leonard Woods and  Alfred Schubert; Construction article
Strictly I.C.; Jun/Jul 2001; Dux-Experimental Miniature Diesel Engine with High-pressure, Combustion-chamber Injection Part 4; Martin Alewijn;; Construction article
Strictly I.C.; Jun/Jul 2001; Design Forum-Totally Opposed, Introduction to a Design Forum Using the Opposed Piston, 2-stroke Engine as a Start Part 4; Tom Roach;; Discussion
Strictly I.C.; Jun/Jul 2001; Progress Report: "Where Miniature Engines Gather"; Paul and Paula Knapp;; Description

Strictly I.C.; Aug/Sept 2001; Rolls-royce Eagle 22, a 24-cylinder, Sleeve-valve, H-configured Crankshafts, Aero Engine Segment 2; Barrington Hares;; Description
Strictly I.C.; Aug/Sept 2001; Design Forum-Totally Opposed, Introduction to a Design Forum Using the Opposed Piston, 2-stroke Engine as a Start Part 5; Tom Roach;; Discussion
Strictly I.C.; Aug/Sept 2001; EVIC III Mk1, Electric Valve, Internal Combustion Engine Part 1; David Bowes;; Construction article
Strictly I.C.; Aug/Sept 2001; Dux-Experimental Miniature Diesel Engine with High-pressure, Combustion-chamber Injection Part 5; Martin Alewijn;; Construction article
Strictly I.C.; Aug/Sept 2001; Anzani W-type, 1/4-scale, 3-cylinder Aircraft Engine Part 2; Alfred Eichinger of Austria; Construction article
Strictly I.C.; Aug/Sept 2001; Armchair Machinist-Rotaries; Leonard Woods;; Discussion

Strictly I.C.; Oct/Nov 2001; 1/3rd-scale, 11.4cc Barr and Stround Part 1; Pieter Dekker;; A 1922, 349cc, single-cylinder, sleeve-valve, motorcycle engine construction article
Strictly I.C.; Oct/Nov 2001; EVIC III Mk1, Electric Valve, Internal Combustion Engine Part 2; David Bowes;; Construction article
Strictly I.C.; Oct/Nov 2001; Anzani W-type, 1/4-scale, 3-cylinder Aircraft Engine Part 3; Alfred Eichinger of Austria; Construction article
Strictly I.C.; Oct/Nov 2001; Forging Your Miniature Valves; Andrew Butters;; Technique

Strictly I.C.; Dec/Jan 2002; EVIC III Mk1, Electric Valve, Internal Combustion Engine Part 3; David Bowes;; Construction article
Strictly I.C.; Dec/Jan 2002; Anzani W-type, 1/4-scale, 3-cylinder Aircraft Engine Part 4; Alfred Eichinger of Austria; Construction article
Strictly I.C.; Dec/Jan 2002; Honor Roll
Strictly I.C.; Dec/Jan 2002; Where Miniature Engines Gather-Progress Report; Paul & Paula Knapp
Strictly I.C.; Dec/Jan 2002; Barr and Stroud, 1/3 -scale, 11.4cc Engine Part 2; Pieter Dekker;; Construction article